|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
National Hardware Door Cup Pull, Plate Size: 0.02 in, 0.34 in D, 1-3/4 in Dia, Flush Mounting, Steel, Brass, Fastener Type: Nail, Suitable for: 1/4 in and Larger Size Panels, By-Passing, Pocket and Other Sliding Doors, Includes: Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BP101P Bypass door floor guide. Screws into the floor to keep bypass doors straight during operation. Adjustable nylon fits doors from 3/4 to 1-3/8 in.
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. If a shim is needed see N 6795 carpet riser to accommodate the height of the carpet.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
N 6841 is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on the back sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems.
|
N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems. For front door panel see N 6667.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4 to 1-3/8 in thick doors; fits on Harvey. Contents: 1 roller assembly, 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
This wardrobe door bumper by Prime-Line Products is constructed of a durable steel bracket and a cushioning, gray rubber bumper. It is easy to install and comes with the necessary fasteners to make mounting a breeze. It is recommended that pilot holes be pre-drilled prior to mounting, to avoid splitting of wood by insertion of screws alone. These wardrobe door bumpers are designed for a universal fit, allowing them to be used with closet doors constructed by a variety of manufacturers. Bumpers like these are strong enough to use on sliding patio doors and help prevent doors from hard slams.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws
|
National Hardware Bypassing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 60 in L
|
Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4 to 1-3/4 in thick doors, fits on Acme.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Doors cannot accidentally jump the track. Wheels never need lubrication. Doors can be hung or removed without detaching hangers. Door guide provides smooth operation and allows up or down adjustment of doors. Dial-action hanger allows easy vertical adjustment. Safe working load: 60 lb.
|
BP210K Bypass door hardware kit includes the hardware required to install two panels into a closet opening. Includes solid aluminum J-track able to hold 60 lb per panel and hangers. Easy to install and built for years of problem free use. Available in various lengths.
|
Plated steel, includes two brass nails for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 72 in L, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws
|
BP210K Bypass door hardware kit includes the hardware required to install two panels into a closet opening. Includes solid aluminum J-track able to hold 60 lb per panel and hangers. Easy to install and built for years of problem free use. Available in various lengths.
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 72 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BP0022F series for Bypass closet door applications includes a aluminum double J-track with built in fascia to hide hanger hardware. Adjustable nylon rollers provide smooth rolling and can support panels up to 50 lb in weight. Available in various sizes.
|
BP210K Bypass door hardware kit includes the hardware required to install two panels into a closet opening. Includes solid aluminum J-track able to hold 60 lb per panel and hangers. Easy to install and built for years of problem free use. Available in various lengths.
|
BP0022F series for Bypass closet door applications includes a aluminum double J-track with built in fascia to hide hanger hardware. Adjustable nylon rollers provide smooth rolling and can support panels up to 50 lb in weight. Available in various sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BP0022F series for Bypass closet door applications includes a aluminum double J-track with built in fascia to hide hanger hardware. Adjustable nylon rollers provide smooth rolling and can support panels up to 50 lb in weight. Available in various sizes.
|
Plated steel, includes two brass nails for installation.
|
Plated steel, includes two brass nails for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BP831BB series is best for heavy duty bypass closet applications. With it's double aluminum box track and 3-wheel ball bearing trolleys the BP831 can support doors up to 200 lb. Track includes built in fascia to hide the hardware. Available in various lengths.
|
BP831BB series is best for heavy duty bypass closet applications. With it's double aluminum box track and 3-wheel ball bearing trolleys the BP831 can support doors up to 200 lb. Track includes built in fascia to hide the hardware. Available in various lengths.
|
BP831BB series is best for heavy duty bypass closet applications. With it's double aluminum box track and 3-wheel ball bearing trolleys the BP831 can support doors up to 200 lb. Track includes built in fascia to hide the hardware. Available in various lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
BP831BB series is best for heavy duty bypass closet applications. With it's double aluminum box track and 3-wheel ball bearing trolleys the BP831 can support doors up to 200 lb. Track includes built in fascia to hide the hardware. Available in various lengths.
|
|
|
Estimates
