|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6565 is a white nylon floor guide for a single 1-3/8 in thick door. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.
|
PD120P Pocket door guide set. Keeps pocket door centered in the opening, so it can easily slide without contacting the frame. Made of resistant nylon in white finish.
|
PD118P allows the connection of two pocket door frames. Steel plates install on front & back of header for a sturdy connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
Johnson Hardware Privacy, Edge Bore Diameter: 1 in, Cross Bore Diameter: 2-1/8 in, Backset Size: 2-3/8 in, US3 Brass
|
N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing that slides into a stamped steel mounting bracket. Used on a 1-3/8 in thick door and 80 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each.
|
PD113P 3-wheel hanger kit. 2 pack kit with acetate wheels for repairs of existing installation. Hardware for 1-door weighing 125 lb.
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly
|
Sure-Loc Passage Pocket Door Pull, Privacy Functions, 1-3/8 to 1-3/4 in Door Thickness, Door Handing: Non-Handed, 2-3/4 in Length, 2-1/2 in Width, 1-3/8 in Height, Metal, Flat Black
|
Tandem wheels; top mount steel hanger for pocket doors; 7/8 in round edge nylon wheel; for 1-3/8 in thick doors up to 75 lb each; fits on Cox. Includes 2 roller assemblies; 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sure-Loc Privacy Pocket Door Pull, 2-7/16 in W, 2-3/4 in H, Flat Black
|
For joining two Johnson 2000 pocket door frames. Kit includes (2) 2055 track stops, (1) top plate, (1) bottom plate and mounting screws.
|
Sliding door pull in brass substrate in aged bronze.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sliding door pull in brass substrate in satin nickel.
|
Sliding door pull in brass substrate in antique brass.
|
Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
N 7239 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.
|
Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick.
|
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
|
Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6771 is a solid brass privacy lock and pull for a pocket door with an polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 2-3/4 in tall and can be reversed from left handed to right handed.
|
Fits doors from 1-1/4 in to 1-5/8 in thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
|
PD119P 3-wheel hanger kit. 2 pack kit with ball bearing wheels for repairs of existing installation. Hardware for one door weighing 200 lb. Ball bearing wheels for smooth & quiet rolling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Door preparation 2-1/8 in face bore 1 in edge bore. Adjustable for 1-3/8 in to 1-3/4 in. Latch bolt for flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.
|
N 7367 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 3-3/4 in tall by 2-1/2 in deep. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
N 6773 is a solid brass privacy lock and pull for a pocket door with an polished chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It can be reversed from left handed to right handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7368 is a solid brass privacy lock and pull for a pocket door with a classic bronze finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.
|
The PD100 pocket door hardware & track kit is built for durability and long-time use. Comes with 3-wheel trolleys and the solid 72 in aluminum track can support doors up to 125 lb. Ideal for those who already have an existing frame and need hardware only.
|
Lock features automatic latching when closed, simple touch-of-a-button locking with emergency release. Good for converging door systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V1951 Privacy, Brass, Chrome, Suitable for: 1-3/8 in THK Doors
|
N 7274 is a satin nickel pocket door flush edge pull. It mounts onto the leading edge of a pocket door and has a pull that is pulled out from its flush position to pull the pocket door out of the wall. Afterwards, the pull retracts back into a flush position.
|
A fast, convenient method of finishing a pocket door installation. Just cut to length and install. No ripping of special thickness stock. Presanded so finishing is a snap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HWSCR6340 soft close series is designed for pocket doors using aluminum box tracks. It's spring loaded 3-wheel trolley design will gently close doors up to 95 lb. Ball bearing trolleys roll smoothly and quietly for maintenance free operation for years. Comes with an additional trolley for retro fits.
|
Kit includes two 2020 hanger, one 1550 door guide, one 1513 door stop. For doors up to 400 lb.
|
Solid brass faceplate. (2-1/2 in L x 2-11/16 in W). Adjustable for 1-3/8 in or 1-3/4 in doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die-cast finger pull. Inner working construction eliminates jamming of lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Pocket Door Hardware, Door Thickness: 3/4 to 1-3/4 in, Aluminum/Particle Board/Steel, Includes: (1) Header and Track Assembly, (4) Jamb Stiffeners, (2) Floor Brackets, (1) Door Guide Set, (2) Snap-in Door Plates, (2) Snap-in Hangers, (1) Bumper, (1) Wrench
|
The 1500 Series standard-duty pocket door frame is designed to carry heavy standard size doors (up to 125 lb each) in standard 2 x 4 timber or steel framed stud walls. The 1500 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 1500 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
The 200PD is commercial-grade hardware ideally suited for heavy door applications where smooth, trouble-free operation and long life is a necessity. The 200PD is primarily designed for on-site pocket door fabrication but can be adapted for use in other various configurations and applications. The heavy-duty extruded aluminum I-beam track is made to precise specifications and zinc-plated ball bearing wheel hangers are manufactured with Johnson's assurance in mind. Heavy-gauge steel components are zinc-plated for a quality appearance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PD3068 pocket door frame kit is built for durability and long-time use. The 3-wheel trolleys feature ball bearing wheels for smooth quiet rolling and the solid aluminum track can support doors up to 200 lb. Kit comes knock down in a box which transports easily and assembles quickly. Comes ready for door widths of 36 in but, can be cut down to accommodate doors as wide as 24 x 80 in high. Wood components constructed of pine and designed for wall structures of 2x4. Combine two kits together by using the converging door kit (Sold separately).
|
The PD3080 pocket door frame kit is built for durability and long-time use. The 3-wheel trolleys feature ball bearing wheels for smooth quiet rolling and the solid aluminum track can support doors up to 200 lb. Kit comes knock down in a box which transports easily and assembles quickly. Comes ready for door widths of 36 in but, can be cut down to accommodate doors as wide as 24 x 96 in high. Wood components constructed of pine and designed for wall structures of 2x4. Combine two kits together by using the converging door kit (Sold separately).
|
The 1500HD Series pocket door frame is designed to carry heavy solid core doors weighing up to 200 lb Ball bearing hanger wheels provide feather-touch door operation making the 1500HD one of the smoothest rolling pocket door installations available. The 1500 is designed to be quickly installed into prepared 2 x 4 timber frame stud walls however, the 1500 can also be adapted for use in various wall thicknesses and with various wall materials and structures. The 1500 frame kit is packaged for easy transport and fast installation for either single or converging 2 door applications and all frame sizes can be cut down to accommodate custom size doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Marwin Pocket Door Frame, Weight Per Door: 200 lb, Door Thickness: 1 to 1-3/4 in, Rough Opening Size: 84-1/2 in, Wood, Suitable for: 6 ft 8 in Door
|
The 2000 Series pocket door frame is designed to carry heavy solid core doors (up to 400 lb each) in standard 2 x 4 timber or steel framed stud walls. The 2000 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 2000 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
The 2000 Series pocket door frame is designed to carry heavy solid core doors (up to 400 lb each) in standard 2 x 4 timber or steel framed stud walls. The 2000 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 2000 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Marwin Pocket Door Frame, Weight Per Door: 200 lb, Door Thickness: 1 to 1-3/4 in, Rough Opening Size: 100-1/2 in, Wood, Suitable for: 8 ft Door
|
|
|
Estimates
