|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks.
|
Used to hold track to back of cabinet, fits most popular side mount rails. Contains two backplates, two sets of installation screws.
|
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32 in x 1-3/16 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.
|
Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32 in x 1-9/32 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.
|
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4 in x 7/8 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.
|
Rollers mount at the front of the drawer opening and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller and 1 set of installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 3/4 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
|
White nylon, 2-3/4 in socket depth allows 2 in of front to back adjustment of the rail, used on side mounted drawer track systems. Raw finish. Contains 1 left hand bracket, 1 right hand bracket, 2 sets of installation screws.
|
Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8 in socket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Light-duty slide designed for general drawer applications. Mounts with staples or screws. Height of 1 in. Required Clearance:1/8 in each side, 1-1/2 in from rear of drawer to cabinet, drawer to be 3/8 in shallower than opening. High-density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
|
Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contains 1 track, 1 front plate, 1 back plate, 1 drawer guide, 2 front rollers, 1 set of installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White, polyethylene.
|
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
|
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
|
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
|
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24 in wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 lb. Height of 1-13/16 in, required clearance of 1/2 in plus 1/32 in minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32 mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
|
Designed for use on box drawer applications up to 24 in wide where the maximum weight load is not to exceed 100 lb. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2 in plus 1/23 in minus 0 in. Height of 1-13/16 in.
|
Designed for use on box drawer applications up to 24 in wide where the maximum weight load is not to exceed 100 lb. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2 in plus 1/23 in minus 0 in. Height of 1-13/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on box drawer applications up to 24 in wide where the maximum weight load is not to exceed 100 lb. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2 in plus 1/23 in minus 0 in. Height of 1-13/16 in.
|
Designed for use on box drawer applications up to 24 in wide where the maximum weight load is not to exceed 100 lb. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2 in plus 1/23 in minus 0 in. Height of 1-13/16 in.
|
Socket depth allows for front to back adjustment of the rail. Used on side mounted drawer track systems. Raw finish.
|
|
|
Estimates