|
|
|
|
|
|
|
|
|
|
|
|
|
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x Male Connection, 200 psi, Brass
|
Plastic male stem fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools.
|
SharkBite? EvoPEX? fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX? fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? EvoPEX? fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX? fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
This quick-connect elbow fitting works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making it ideal for vibrating and dynamic applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble-free service. Produced of off-white Polysulfone, a high-performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
PEX only push-fitting used to permanently transition between PEX pipe and an MNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp or clamp or PEX rings, increasing productivity. Securely and permanently transition between PEX pipe and an MNPT thread. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
PEX only push-fitting used to permanently transition between PEX pipe and an FNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp or clamp or PEX rings, increasing productivity. Securely and permanently transition between PEX pipe and an FNPT thread. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
|
This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.
|
Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
SharkBite? EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
The SharkBite? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? stop valve connectors allow you to easily connect 1/4 in (3/8 in OD) copper tube sized pipe (CTS) to either a 1/4 or 3/8 in compression connection, which are primarily used for refrigerators or ice makers. The push-to-connect connection is the fastest and easiest way to connect to copper, PEX, CPVC or PE-RT pipe and requires no soldering, clamps, unions or glue.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
B & K ProLine Pipe Tee, Nominal Size: 1/2 in, Push-Fit Connection, 200 psi, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
The SharkBite? push-to-connect faucet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 1/2 in threaded connection on the other end. They are also easily rotatable after installation for easy installation even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
PEX only push-fitting used to permanently transition between PEX pipe and an MNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp or clamp or PEX rings, increasing productivity. Securely and permanently transition between PEX pipe and an MNPT thread. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
PEX only push-fitting used to permanently transition between PEX pipe and an FNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp or clamp or PEX rings, increasing productivity. Securely and permanently transition between PEX pipe and an FNPT thread. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
|
The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 3/8 in x 1/2 in plastic quick-connect elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
SharkBite Max female adapters have an innovative push-to-connect design that enables quick and easy transitions between CTS pipe to an MNPT threaded connections. Ideal for working in tight spaces and easier to use, Max female adapters make installs more efficient.
|
SharkBite Max push-to-connect male adapters are a fast way to transition between CTS pipe and an FNPT threaded connection. Ideal for working in tight spaces, Max male adapters enable more efficient install times and ease-of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dishwasher elbows are a 90 deg fitting that connects the hot water line to the dishwasher. SharkBite? dishwasher elbows enable quick and easy connection and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.
|
When transitioning pipe size, there is no easier way than with SharkBite? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.
|
SharkBite? EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
|
B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.
|
|
|
Estimates