|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Stake, 6-3/4 in Length, Plastic, Black, Suitable for: 1/2 in Poly Tubing
|
Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
|
Rain Bird Hole Punch, Plastic, Black, Suitable for: Drippers, 1/4 in Fittings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Staked Riser, Adjustable, 18 in Length, Poly, Black, Suitable for: 1/4 in Threaded Drippers and Micro Sprays
|
Rain Bird Drip Irrigation Adapter, 1/2 in Connection, Male x Barb Connection, PVC, Brown, 0 to 60 psi
|
Used to attach 1/4 in vinyl distribution tubing to wood without pinching the tube.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Universal compression fitting tee for use with all 1/2 in drip tubing brands.
|
Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components
|
Rain Bird Hose Adapter, 3/4 in Nominal, FHT x Tube Connection, 70 psi Pressure, Plastic, Black, Suitable for: 1/2 to 5/8 in Tubing
|
This valve easily adjusts or shuts off flow in 1/4 in drip tubing runs to different sections of your plant watering area. Avoid over or under-watering of plants with different moisture needs in a timed drip zone. Barbed ends permit easy, leak-free insertion into drip tubing. Top cap turns to adjust or completely shut-off water flow, ideal for use when making repairs. Constructed of high quality, long-lasting UV resistant materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stake 1/4 in tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.
|
Ideal for shrub plantings, trees, containers and flower beds.
|
Ideal for shrub plantings, trees, containers and flower beds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 2 pieces of 1/2 in tubing.
|
Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.
|
Heavy-duty plastic stakes hold 1/4 in lines in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Fan Micro Spray, Riser Mount, Part-Circle, 70 psi Operating, 0 to 31 gph Flow Rate, 0 to 10 ft Coverage Diameter, Black, Plastic Base, Includes: (2) Fan Micro Sprays
|
Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively.
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double barbed design allows water pressure up to 50 psi.
|
Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easily adjust or shut off flow in 1/2 in or 5/8 in drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
|
Rain Bird Mister, Threaded, Specifications: 0 to 31 gph Flow Rate, 10 to 30 psi Operating Pressure, 10-32 Threaded Inlet Type, 0 to 1-1/2 in Throw Radius, Plastic, Black
|
Rain Bird Mister Spray, 1/4 in Connection, Barb Connection, Spray Pattern: Full-Circle, Mist, 360 deg Spray Angle, 0 to 6 gph Flow Rate, Plastic, Black, Dimensions: 12 x 1/4 x 1/4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Connect 2 pieces of 1/2 in tubing in an "L" shape.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
|
Connect 3 pieces of 1/2 in tubing in a "T" shape.
|
Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing.
|
For water pressure up to 60 psi. Ends are color-coded for easy size identification.
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Connect 2 pieces of 1/4 in tubing or tap into the side of 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compression tees made from ABS. For water pressure up to 60 psi.
|
Rain Bird Free-Flow Manifold, 1/2 x 1/4 in, FPT x Barb, 6-Port, 50 psi, Gallons per Minute: 2 gpm, Black
|
Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4 in (0.160 in ID) vinyl tubing only. Double barbed design allows water pressure up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adds supplemental watering to individual plants.
|
The drippers' 0.5 GPH flow is ideal for small containers and plants with relatively low moisture needs.
|
Rain Bird Rotary Micro Sprinkler, Riser Mount, 1/4 in Connection, Full-Circle, 0 to 70 psi Operating, 0 to 33 gph Flow Rate, 0 to 14 ft Coverage Diameter, Black, Includes: (4) Rotary Micro Sprinklers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position.
|
Adds supplemental watering to individual plants.
|
Raindrip Stream Spray Bubbler, Adjustable, Specifications: 1/4 in Barb Connection, 3 ft Dia Coverage, 0 to 13 gph Flow Rate, 30 psi Operating Pressure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with spot watering emitters or to run water to emitter tubing.
|
Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls.
|
2 gph, 1/2 in FPT 6-port metered manifold. For drip irrigation systems. Installs onto 1/2 in riser. Connects up to 6 micro watering devices to a sprinkler riser.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
Rain Bird Micro Umbrella Bubbler, Barb Connection, Staked Dripper Type, 70 psi Maximum, 0 to 35 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/4 in Tubing Size, Black, Includes: (4) Micro Umbrella Bubblers
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 8 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in hose female thread inlet; 3/4 in male hose thread outlet. Includes filter washer. Available in 3/4 in BSP threads. Atmospheric vacuum breaker made of high impact ABS. Keeps impure water from syphoning back into water supply. Maximum flow rate of 480 GPH.
|
Atmospheric vacuum breakers made of high-impact ABS. Keeps impure water from syphoning back into water supply. 3/4 in hose female thread inlet, 3/4 in male pipe thread outlet. Includes filter washer. Available in 3/4 in BSP threads.
|
Half circle, Ideal for shrub plantings, trees, containers and flower beds. Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing. Spray pattern 180 deg rotation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable low-flow sprinkler heads. Waters two 30 deg patterns each with a radius up to 8 ft. Adjustable length of up to 16 ft x 4 ft. Sprayer inlet size of 10-32 NFT. Knob adjusts the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing.
|
Rain Bird Micro Bubbler, Barb Connection, Self-Piercing Dripper Type, 40 psi Maximum, 0 to 13 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/2 in Tubing Size, Black, Includes: (4) Micro Bubblers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Pressure Regulator, FHT Inlet Connection Type, MHT Outlet Connection Type, 20 gpm Flow Rate, 25 psi Pressure, Black, 1.3 in Length, 10.2 in Width, 6-1/2 in Height
|
Quickly and easily connects to any 3/4 male pipe threaded (MPT) outdoor faucet, garden hose or component. Safely prevents backward flow of water from a drip irrigation system into your potable/clean drinking water supply. Stainless steel 150 mesh filter catches debris to help keep system functioning properly. Simply thread into place; take care fitting is fully tightened so rubber gasket can correctly seal assuring leak-proof performance. Constructed of highly durable UV and chemical-resistant materials to assure long life.
|
Heavy-gauge galvanized wire secures 1/2 in tubing to the ground.10 Pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy way to add or remove spot watering emitters, fittings and plugs.
|
Sprays 12 individual streams over a circular area with an adjustable diameter of up to 18 ft. For windy conditions, sprayer inlet size is 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
For flowers, ground cover and hillsides. Use with R382C, 382010, 384RO, 384ROU, R366C, 336005 and 336010.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remains strong in the hot sun, flexible in cool temperatures. Black Color.
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil (loam) Green (2 gph) - ideal for light soil (sandy).
|
Adjustable mister and 4 in high-density polyethylene riser with 1/4 in barbed adaptors. Adjustable from fine to heavy mist up to 3 ft Dia. Flow rate 4 to 7 gph at 25 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green -(2GPH) Ideal for light soil (sandy).
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil(loam) Green (2 gph) - ideal for light soil (sandy).
|
Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.
|
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blank tubing. 1/4 in distribution tubing for drip irrigation. 6 mm OD. Connects with Rain Bird 1/4 in barbed fittings.
|
Rain Bird Dripper Emitter, 1/4, 1/2 in Connection, Barb Connection, Dripper Type: Flag Style, Maximum Pressure: 40 psi, Gallons per Hour: 1 gph, Spray Pattern: Drip, Tubing Size: 1/4, 1/2 in, Plastic, Black
|
Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Inline Filter, MNPT Inlet Connection Type, MNPT Outlet Connection Type, 0.2 to 5 gpm Flow Rate, 150 psi Pressure, Black, 2-1/8 in Length, 6 in Width, 4-3/8 in Height
|
Designed for comfortable use. Punches holes 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings.
|
Using patented technology, converts a traditional underground sprinkler system to a micro irrigation drip system. Waters Up to eight plants with one unit. Fully adjustable ports with flows that can be individually set from 0 to 30 gph. Swivel arms aid in fine-tuning outlet tubing position. Pressure-rated up to 8880 psi. Built-in filter extends system lifespan by preventing clogging from debris. UV inhibitors minimize polymer breakdown when used in outdoor applications.
|
|
|
Estimates
