|
|
|
|
|
|
|
|
|
|
|
Used for light-duty household and crafting stapling jobs. Color-coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and arrow JT-21 staplers.
|
1000-pack of 5/16 in heavy-duty narrow crown staples are convenient and reliable. Used for heavy-duty stapling jobs such as insulation carpet underlayment and roofing felt, these staples come in sturdy plastic packaging to helps reduce breakage of the stick. With color-coded packaging, you can easily choose the correct brads for the project you are working on.
|
Used for light-duty household and crafting stapling jobs. Color-coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and arrow JT-21 staplers.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL, Arrow: T50, T50PBN, ETF50, T55, HT50, Powershot 5700.
|
Used for craft, hobby and finish carpentry projects. Sturdy plastic packaging reduces staple breakage. Fits TR200, TR250, TRE500, TRE550, TRE650 Electric Brad Nailers.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use washers when joining soft materials or when existing hole is oversize.
|
Use washers when joining soft materials or when existing hole is oversize.
|
For use with Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL, Arrow: T50, T50PBN, ETF50, T55, HT50, Powershot 5700.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
This 1000-pack of 9/16 in heavy-duty narrow crown staples are convenient and reliable. Used for heavy-duty stapling jobs such as insulation carpet underlayment and roofing felt, these staples come in sturdy plastic packaging to helps reduce breakage of the stick. With color-coded packaging, you can easily choose the correct brads for the project you are working on.
|
For use with Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL, Arrow: T50, T50PBN, ETF50, T55, HT50, Powershot 5700.
|
|
|
|
|
|
|
|
|
|
|
|
|
Surebonder Blind Rivet, Long, Grip Range: 1/2 in, Steel, 1/2 in L
|
The 1/4 in heavy-duty narrow crown staples work with the TRA700 Series stapler. They can be used for insulation, carpet underlayment and roofing felt.
|
Used for light-duty household and crafting stapling jobs. Color-coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and arrow JT-21 staplers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Surebonder Blind Rivet, Short, Grip Range: 1/8 in, Steel, 1/8 in L
|
Surebonder Blind Rivet, Short, Grip Range: 1/8 in, Aluminum, Brown, 1/8 in L
|
Surebonder Backup Washer, Rivet, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
The 5/16 in heavy-duty narrow crown staples work with the TRA700 Series stapler. They can be used for insulation, carpet underlayment and roofing felt.
|
Surebonder Pop Rivet, Short, Grip Range: 1/8 in, Aluminum, 1/8 in L
|
Surebonder Pop Rivet, Long, Grip Range: 1/2 in, Aluminum, 1/2 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1/2 in heavy-duty narrow crown staples work with the TRA700 Series stapler. They can be used for insulation, carpet underlayment and roofing felt.
|
The 1/2 in heavy-duty narrow crown staples work with the TRA700 Series stapler. They can be used for insulation, carpet underlayment and roofing felt.
|
Great for very Heavy-Duty jobs and when riveting steel to steel. Stainless steel rivets are not for use with manually operated rivet tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
Great for very Heavy-Duty jobs and when riveting steel to steel. Stainless steel rivets are not for use with manually operated rivet tools.
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
For use with Arrow model HT19 tacker.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Blue Point Fasteners Drive Pin with Plastic Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Knurled, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction.
|
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
Duo-Fast Wide Crown Staple, Crown Width: 1/2 in, Leg Length: 5/16 in, Point Type: Chisel, Material Gauge: 20 ga, Steel, Galvanized, Suitable for: Duo-Fast HT550 Hammer Tacker, CS5000 Compression Stapler, SureShot 5020DLAF Stapler, EWC5018A Electric Stapler
|
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools
|
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for insulation and roofing paper applications.
|
Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Arrow T50 Staple, Heavy-Duty, Leg Length: 1/2 to 3/8 in, Includes: (625) 1/4 in, (625) 3/8 in, (625) 1/2 in Leg Length Staples
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Bostitch T5-6, H30-6 and P6C-6.
|
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Great for screen repairing, light upholstery work, arts and crafts projects and scores of other light-duty household tacking chores. Comfortable soft-grip handle, easy squeeze mechanism, built-in stapler remover and large reload window on bottom of stapler.
|
Fits Bostitch P6C-8, H30-8, PC4000, PC5000, T15, T15C, T58D4, JK:694, Prebena HHD-10, Rapid:31. Used for insulation and roofing paper applications.
|
Paslode Staple, Crown Width: 1/2 in, Leg Length: 3/8 in, Point Type: Chisel, Material Gauge: 20 ga, Steel, Galvanized, Suitable for: Duo-Fast CS5000 Compression Stapler, SureShot 5020DLAF Stapler, EWC5018A Electric Stapler
|
|
|
|
|
|
|
|
|
|
|
|
|
7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
|
For use with Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL, Arrow: T50, T50PBN, ETF50, T55, HT50, Powershot 5700.
|
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage.
|
Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
|
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
|
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
|
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
|
|