|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 1-7/8 in dust extraction adapter kit allows our 1-7/8 in hoses to connect to most power tools for dust collection directly from the tool. The dust extraction kit includes three adapters for multiple different uses and tool fitment. The hose clip adapter screws onto the end of the hose and connects directly to Milwaukee power tools or the other two adapters. The power tool adapter clips into the hose clip adapter and provides a friction fit to most power tool dust ports. The table saw adapter clips into the hose clip adapter and provides a secure connection to 2-1/2 in table saw dust ports. The MILWAUKEE? 1-7/8 in dust extraction adapter kit includes a gray color ring for quick identification of its 1-7/8 in Dia.
|
The Milwaukee? SDS Plus DUST TRAP? is the industry's first OSHA? compliance solution without a vacuum, ideal for overhead drilling applications. The universal fit allows the DUST TRAP? to work with all SDS Plus rotary hammers and SDS Plus drill bits up to an 8 in length, including stop bits and other anchor installations tools. The clear sleeve allows visibility while the locking mechanism enables easy storage on the jobsite. The compact, collapsible design is ideal for tough to reach places, providing superior productivity. The DUST TRAP? is OSHA? objective data compliance solution when used without a vacuum and OSHA? Table 1 compliant when used with a dust extractor, giving users the flexibility to adjust to the daily demands of the jobsite while being compliant. Replacement SDS+ DUST TRAP? Sleeves are available (48-03-3235).
|
The Milwaukee? 49-90-1955 fleece dust bag is compatible with the Milwaukee? 8 gal dust extractor (8960-20) to capture fine dust. The fleece bag is fully enclosed and acts a pre-filter which will prolong the life of the main filter and minimize dust exposure during disposal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement fleece filter bag for VAC series 14 gal dust extractors. Filter bags act as a primary filter, capturing large pieces of debris and increasing the life of the main filter. Using a filter bag is the most efficient way to dispose of the captured dust and debris. Each filter bag comes with a port cover which securely closes opening of the filter bag and keeps the dust and debris inside during the disposal process.
|
The Milwaukee? 49-40-6110 cutting dust shroud provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 49-40-6110 is optimized for cutting applications with both AC and DC Milwaukee? small angle grinders.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HDC200 is a flexible dust-collection attachment for SDS-plus? and SDS-max? hammers for drilling into concrete. It is optimized for drilling diameters from 5/8 to 1-3/8 in but can accommodate up to 2-1/2 in if the brush ring is removed. The attachment features two unique air chambers, one allows the drilling bit to pass through when drilling into the work surface. The second air chamber is designed to maintain suction to the wall during the drilling application. The dust port is designed for Bosch 1-3/8 in vacuum nozzle but can be used with either 1-1/4 in or 2 in vacuum nozzles when used with the appropriate adapter. The system is universal and is designed to connect to a vacuum so that it can be used with any size hammer and can accommodate the full range of drill bit diameters and drilling depth.
|
The MILWAUKEE? 49-40-6101 surface grinding dust shroud provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 49-40-6101 is optimized for surface grinding applications with both AC and DC MILWAUKEE? small angle grinders. Attach to the MILWAUKEE? 8960-20 8 gal dust extractor for a complete table 1 OSHA compliant solution.
|
Milwaukee? SDS max dust extraction attachment provides users with a solution for the regulation on respirable crystalline dust (29 CFR 1926.1153). The attachment is optimized for all drilling depths and any hole ranging from 1/4 and 2-3/4 in Dia. Its removable brush rings allows for increased tool life when performing larger dry coring applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee Main Filter, Suitable for: 8 gal Dust Extractor
|
The Bosch VF130H long-life HEPA filter pairs with the either the VAC090A or VAC140A dust extractor with auto filter cleaning to help move users toward compliancy with the OSHA respirable crystalline silica dust regulation. The VF130H captures 99.97% of particles 0.3 microns and larger and it has a low-stick surface to enhance the filter-cleaning process. The VF130H filter and dust extractor unit is a critical component in the end-to-end Bosch PRO+GUARD? protection system - along with the right tool, accessory, attachment, connections and respirator. The use of a fleece filter bag is highly recommended when using VF130H, as it will help prevent the filter from being directly exposed to abrasive materials and sharp objects that can be collected during normal use of a dust extractor. The filter is for use in dry applications only.
|
Our SDS max chisel boot provides you with a solution for the regulation on respirable crystalline silica dust management. The SDS attachment is optimized for our MILWAUKEE? SDS max rotary hammers for chipping applications with bull point and flat chisels up to 1-1/8 in wide. It will work on competitive hammers. Its adjustable strap secures the hose away from the application, providing you with increased productivity. Attaching the chisel boot to our 8 Gallon Dust Extractor (8960-20) provides you with a complete OSHA Table 1 compliant solution.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MILWAUKEE 49-90-1952 HEPA replacement filter captures 99.97 % of all particles greater than 0.3 micron and is compatible with the MILWAUKEE 8 gal dust extractor (8960-20).
|
The Bosch 18SG-7 7 in concrete surfacing attachment dust collection system reduces clean-up time and provides cleaner, safer air for user.
|
Milwaukee? HAMMERVAC? Dedicated dust extractor (2712-DE) features an inline dedicated design engineered to connect directly to and be power by the M18? FUEL? 1 in SDS Plus rotary hammer (2712-22). This design allows for a very compact HAMMERVAC? and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS?, which filter 99.97% of all particles greater than 0.3 um, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high-capacity dust box, users can now work longer without emptying dust box as often.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee? 8 gal dust extractor provides users with an OSHA approved solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). An automatic filter cleaning mechanism helps maintain consistent airflow and suction at 148 cfm in tough dust-producing applications. The extractor's unique two step filtration system includes a 99.97% efficient HEPA filter as the final step, leading to cleaner air and a safer work environment. For added convenience, an on-board tool activated plug allows users to start and stop the vacuum with a power tool to increase productivity. The adapters included are compatible with all Milwaukee? dust extraction accessories.
|
Stay in compliance with current 1926.1153 osha dust regulations utilizing the powerful 10 gal wet/dry hepa dust extractor with automatic filter cleaning. Delivering up to 155 cfm suction, with a 90 in Static water lift, this convenient dust solution features an automatic filter cleaning system that initiates every 30 s. When paired with fleece vacuum bags (DWV9402) and a 99.97% efficient hepa filter (DWV9330) this product helps prevent releasing harmful dust into the work environment. For added convenience, an optional storage rack is available to interlock with Tstak? and Toughsystem? storage solutions. This tool comes tag Ready? for seamless integration into the DeWALT? Tool Connect? system.
|
|
|
Estimates