|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapter for Rockwell SoniCrafter hex interface model.
|
Our OPEN-LOK? blade adapter five pack is for Dremel multi-tool models MM45 and MM50. The Milwaukee? multi-tool blade adapter is only needed for use with the Dremel Brand multi-tool models MM45 and MM50. It is not required for any additional brands or models. The raised adapter shape design allows you to easily install and remove. Our blade adapter is designed and made in the USA.
|
Bosch Chuck Adapter Kit, Chuck Capacity: 1/8 in, Chuck Mount Size: 1/4 in, Keyed/Keyless Chucks: Keyed, Steel, Includes: Chuck
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 hook-and-loop sanding triangles including three 60G, three 80G, three 120G and three 240G. For use with most detail sanders and all brands of multi-purpose oscillating tools.
|
Sand paper accessory for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Requires MM11 or MM14 hook and loop pad accessory.
|
Diablo Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 80 Grit, Coarse Grit Grade, 3-1/8 in Length, 3-1/8 in Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 120 Grit, Fine Grit Grade, 3-1/8 in Length, 3-1/8 in Width
|
Diablo Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 220 Grit, Ultra Fine Grit Grade, 3-1/8 in Length, 3-1/8 in Width
|
Diablo Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 80 Grit, Coarse Grit Grade, 3-3/4 in Length, 3-3/4 in Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 120 Grit, Fine Grit Grade, 3-3/4 in Length, 3-3/4 in Width
|
Diablo Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 220 Grit, Ultra Fine Grit Grade, 3-3/4 in Length, 3-3/4 in Width
|
Our universal fit OPEN-LOK? triangle sandpaper is designed for oscillating multi-tools. The triangle sandpaper utilizes hook and loop technology for you to make fast and secure paper changes. The universal dust extraction hole placement allows for use with most dust extraction systems. The long-lasting silicon carbide grit is ideal for wood and paint. This Milwaukee? sandpaper works with any triangle sanding pad with hook and loop technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our universal fit OPEN-LOK? triangle sandpaper is designed for oscillating multi-tools. The triangle sandpaper utilizes hook and loop technology for you to make fast and secure paper changes. The universal dust extraction hole placement allows for use with most dust extraction systems. The long-lasting silicon carbide grit is ideal for wood and paint. This Milwaukee? sandpaper works with any triangle sanding pad with hook and loop technology.
|
Our universal fit OPEN-LOK? triangle sandpaper is designed for oscillating multi-tools. The triangle sandpaper utilizes hook and loop technology for you to make fast and secure paper changes. The universal dust extraction hole placement allows for use with most dust extraction systems. The long-lasting silicon carbide grit is ideal for wood and paint. This Milwaukee? sandpaper works with any triangle sanding pad with hook and loop technology.
|
Our universal fit OPEN-LOK? triangle sandpaper is designed for oscillating multi-tools. The triangle sandpaper utilizes hook and loop technology for you to make fast and secure paper changes. The universal dust extraction hole placement allows for use with most dust extraction systems. The long-lasting silicon carbide grit is ideal for wood and paint. This Milwaukee? sandpaper works with any triangle sanding pad with hook and loop technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our universal fit OPEN-LOK? triangle sandpaper is designed for oscillating multi-tools. The triangle sandpaper utilizes hook and loop technology for you to make fast and secure paper changes. The universal dust extraction hole placement allows for use with most dust extraction systems. The long-lasting silicon carbide grit is ideal for wood and paint. This Milwaukee? sandpaper works with any triangle sanding pad with hook and loop technology.
|
HSS bits can be easily sharpened to a very fine edge for smooth, precise cuts. HSS bits work best with softwoods and light plastics. Single flute allows for faster feed rates.
|
Replacement flange for the SoniCrafter tool. Includes screw, flange and Allen key.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed from high-speed steel with a cutting depth of 1 in. Used for window and door cutouts.
|
DeWALT Mesh Sandpaper, Silicone Carbide Abrasive, 120 Grit, Fine Grit Grade, 3-3/4 in Length
|
DeWALT Mesh Sandpaper, Silicone Carbide Abrasive, 80 Grit, Medium Grit Grade, 3-3/4 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo Assorted Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 80, 120, 220 Grit, Coarse, Fine, Ultra Fine Grit Grade, 3-1/8 in Length, 3-1/8 in Width, Includes: (4) 80 Grit, (4) 120 Grit, (4) 220 Grit Oscillating Triangle Sanding Sheets
|
Diablo Assorted Triangular Sanding Sheet, Hook-and-Lock Backing, Ceramic Grain Abrasive, 80, 120, 220 Grit, Coarse, Fine, Ultra Fine Grit Grade, 3-3/4 in Length, 3-3/4 in Width, Includes: (4) 80 Grit, (4) 120 Grit, (4) 220 Grit Oscillating Triangle Sanding Sheets
|
"Slotting cutter arbors will work with any slotting cutter with a 5/16"" arbor. Use on hand held and table mounted portable routers."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slotting cutter arbors will work with any slotting cutter with a 5/16 in arbor. Use on hand held and table mounted portable routers.
|
Constructed from carbide with a cutting depth of 1 in, used to cut ceramic tile, cement board, stucco and plaster.
|
Adapts universal fit accessories to fit onto prior model Sonicrafter tool with hex interface. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Constructed from high-speed steel with a shank of 1/8 in, cuts all types of wood, wood composites, fiberglass, solid surface materials, vinyl and aluminum siding, plastic and laminates.
|
Sand paper accessory to sand paint, varnish and filling compound on a variety of surfaces. Requires hook and loop pad accessory.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Single flute trim bit allows for a faster feed rate. Solid carbide gives best rigidity and long life.
|
Designed to be compatible with all major oscillating tool brands, DeWALT oscillating sandpaper and sanding pads are ideal for sanding in corners and other hard-to-reach areas. Crafted for long life and fast material removal.
|
Low profile design gets into tight spots. High-density hook-and-loop attachment system holds accessories securely. Ideal for detail sanding jobs utilizing quick attach hook-and-loop sandpaper. For use with all brands of multi-purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high-speed steel with a cutting depth of 1 in and shank of size 5/32 in. Used for cutting drywall. 2/card.
|
For controlled drywall cut-outs around electrical boxes and framing. Shank of size 1/8 in.
|
Made of high-speed steel with a cutting depth of 1-1/2 in, used for basic drywall cut-outs, when a slower, controlled cut of outlet boxes in drywall is needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our universal fit OPEN-LOK? 3-1/2 in triangle sanding pad one pack is for oscillating multi-tools. The Milwaukee? 3-1/2 in triangle sanding pad utilizes hook and loop technology for fast and secure paper changes. The sanding pad uses a dense foam backer for flexibility and durability, delivering you a longer pad life and a smooth sanding experience. This multi-tool sanding pad is ideal for detail sanding and hard to reach areas.
|
For detail sanding in small areas and corners. Use with extraction attachment for dust removal. Use on wood, plastic and hardened fillers. Perforated. For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Holds sanding sheet for detail sanding in very small areas, openings and corners. Use on wood plastic and hardened fillers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
The 41 Series Bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dremel Oscillating Tool Backing Pad, Universal Hook and Loop, Specifications: StarLock Attachment, Metal, Black, Dimensions: 3 x 3.15 in, Suitable for: MM20, MM30, MM40, MM45, 6300, 8300 Dremel, Rockwell, Makita, Ridgid, Milwaukee, DeWALT, Porter Cable, Fein and Bosch Oscillating Tool
|
Detail sanding triangles are for use on wood projects. Applications include multi-purpose sanding on hardwoods such as oak and yellow pine or building boards like plywood.
|
Detail sanding triangles are for use on wood projects. Applications include multi-purpose sanding on hardwoods such as oak and yellow pine or building boards like plywood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes four pieces of each 40, 80, 120, 180 and 220 grit. Hook-and-loop paper retention. Use with RW9147 (Orgill Sku #325.4372).
|
Perforated for use with dust extraction kit. Hook-and-loop. For universal sanding applications. Includes four each of 40, 80, 120, 180 and 220 grit sanding sheets.
|
The DW6654 reversible carbide planer blades are used with DCP580B, DW677K, DW680K, DW678K, D26676 or D26677.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Constructed from high-speed steel with a cutting depth of 1 in and a shank of 5/32 in, for use with cut out tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with all Rotozip spiral saws and drywall routers. Kit includes 1/8 in, 5/32 in and 1/4 in collets and collet nut.
|
Diablo Oscillating Sanding Pad, 3-1/4 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built to cut through metal, carbide constructed, high-speed bit cuts up to 18 ga steel, use for HVAC, steel studs, aluminum siding and more, bit tip allows for plunging directly into the work piece for easy cut start.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
Imperial Blades Sanding Pad, 3-1/8 in L, Applicable Materials: Paint, Varnish, Wood
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed from high-speed steel with a cutting depth of 1 in and a shank of 5/32 in. For use with cut out tools when cutting underlayment.
|
Allows you to cut through laminate flooring with ease. Carbide bit developed specifically for excellent performance and long-life in cutting laminate flooring. Also cuts through hard and soft wood flooring, plywood and other wood-based materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed from carbide with a cutting depth of 1 in and a shank of 1/4 in. For used to cut cement board, stucco and plaster.
|
Rotozip Drill Bit, 1/8 in Dia, Point Type: Standard, Applicable Materials: Drywall
|
Imperial Blades ONE FIT Oscillating Multi-Tool Sanding Variety Pack, 60, 120, 240 Grit, Grit Grade: Coarse, Medium, Fine, Attachment Type: Hook and Loop, 3-1/2 in L, 3-1/2 in W, Black, Applicable Materials: Wood, Paint and Varnish, Suitable for: Milwaukee, Ridgid, Ryobi, Bosch, DeWalt, Dremel, Fein, Makita, Rockwell and More Non-Starlock Multi-Tools, Includes: One Fit Sanding Pad Attachment
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sharpening on both sides allows reversal for longer life. For use with #DW675K planer.
|
Our universal fit OPEN-LOK? 3-1/2 in triangle sandpaper 25-piece variety pack is designed for oscillating multi-tools. The Milwaukee? 3-1/2 in triangle sandpaper utilizes hook and loop technology for fast and secure paper changes. The universal hole placement allows for use with dust extraction systems. This kit includes 60 grit, 80 grit, 120 grit, 180 grit and 240 grit silicon carbide sandpaper ideal for paint removal and wood sanding, helping you gain access in hard to reach areas.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits will work with many popular dovetailing jigs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. 14 degree angle.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Premium-quality micro grain carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. For use in cutting slots, the three-wing cutter is used for better cut finish. The fully hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides everything you need to cut drywall, wood, plastics and wall tile in one convenient package.
|
Quick Fit hook and loop pad accessory allows multi-max oscillating tools to accept sand papers and diamond paper.
|
Our universal fit OPEN-LOK? 3-1/2 in triangle sanding pad and paper 10-piece variety pack is for oscillating multi-tools. The Milwaukee? 3-1/2 in triangle sanding pad and paper variety set utilizes hook and loop technology for fast and secure paper changes. The sanding pad uses a dense foam backer for flexibility and durability, delivering you a longer pad life and a smooth sanding experience. This kit includes 60 grit, 120 grit and 240 grit silicon carbide sandpaper, ideal for paint removal and wood sanding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Up cut spiral is used for upward chip evacuation and the best finish on the bottom side of workpiece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Produce a precision slot for T-moldings, spline joints, or many other applications. Bodies are heat treated for strength and are computer balanced for vibration free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
|
|
Estimates
