Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - TRANSPORT / BINDER
CHAIN - BINDER ASSEMBLED CHAIN - STRAIGHT LINK CHAIN - TWIST LINK
CHAIN - JACK CHAIN - TWIN LOOP CHAIN - SASH
CHAIN - DECORATIVE CHAIN - PLASTIC CHAIN - SPECIALTY
GRAB HOOKS SLIP HOOKS CHAIN - COLD SHUTS
CHAIN - LAP LINKS CHAIN - QUICK LINKS CHAIN - SNAP LINKS
CHAIN - SWIVELS CHAIN - CLEVIS LINKS SPECIALTY FARM
HITCH PINS ANCHOR SHACKLES CLEVISES & PINS
SNAPS WELDED RINGS CHAIN HOISTS
LOAD BINDERS POWER HOISTS ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 8
PIN LYNCH STANDARD 1/4X1-1/4IN National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link
National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc
SHUT COLD ZINC PLATED 3/16IN PIN LYNCH STANDRD 7/16X1-1/4IN Campbell T7665032 Welded Ring
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Lynch pins from Koch Industries are yellow zinc-plated. They feature a solid pin with an attached self-locking ring that snaps firmly down. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated
SHUT COLD ZN PLTD STEEL 1/4IN Campbell T7661152 Welded Ring SHUT COLD ZN PLTD STEEL 5/16IN
Baron Cold Shut, Working Load Limit: 750 lb, Trade Size: 1/4 in, Steel, Zinc Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated
National Hardware 3152BC Lap Link SPRING SNAP STEEL ZN 3/16 PIN LYNCH LONG 7/16 X 1-3/4IN
National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device.
PIN LYNCH STANDARD 3/16 X 1IN PIN HAIR 3/32 X 1-5/8IN Fehr Bros 1/4IN Anchor Shackle
Koch Wire Hair Pin Clip, 3/32 in Pin Diameter, 1-5/8 in Overall Length, Zinc-Plated, Yellow Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
RING WELD 2-1/2IN Campbell T7660841 Welded Ring Campbell T7665042 Welded Ring
Baron Round Weld Ring, Ring Diameter: 2-1/2 in, Chain Size: #2, Steel, Zinc Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Nickel-Plated
Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut PIN LOCK PTO RND 5/16X2-1/4IN
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. PTO locking pins from Koch Industries are yellow zinc-plated. They are available in either round or square wire retainers.
SNAP SPRG INTRLCKNG AL 3-1/8IN PIN LYNCH STANDARD 1/4X1-1/4IN Baron 193LR-1/4" Screw Pin Anchor Shackle
National Hardware Interlocking Spring Snap, Working Load Limit: 150 lb, Trade Size: 3-1/8 in, Snap Opening Size: 1 in, Wire Diameter: 5/16 in, Aluminum, Multi-Color, Dimensions: 2-11/32 in H x 1-23/32 in W, Suitable for: Rope Koch Standard Lynch Pin, 1/4 in Pin Diameter, 1-1/4 in Overall Length, Zinc-Plated, Yellow Baron Anchor Shackle, Working Load Limit: 0.5 ton, Pin Type: Screw, Pin Diameter: 5/16 in, Steel, Galvanized
SHACKLE ANCHOR SCRW PIN 3/16IN Midland Big Orange 081163/MC645G Anchor Shackle BREACHING SNAP ZN 2-1/2
Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Bit Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/2 in L
SNAP BIT 1-3/4IN Baron 1407 Open Eye Spring Snap National Hardware 3153BC Cold Shut
Baron Bit Snap, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 1-3/4 in L Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 3-3/8 in L National Hardware 3153BC Cold Shut, Working Load Limit: 1250 lb, Trade Size: 1/4 in, Steel, Zinc
National Hardware 3153BC Cold Shut Baron 2450-1/4 Snap Link PIN LYNCH STANDRD 5/16X1-1/4IN
National Hardware 3153BC Cold Shut, Working Load Limit: 1900 lb, Trade Size: 5/16 in, Steel, Zinc Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device.
SPRING SNAP RNDEYE SWVL 3/8 Campbell T7665001 Welded Ring Campbell T4900524 Cold Shut
Baron Spring Snap, Working Load Limit: 45 lb, Zinc, Nickel, Dimensions: 2-5/8 in L Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-Plated Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
SHUT COLD ZINC PLATED 3/8IN SHUT COLD ZN PLTD STEEL 3/8IN LINK LAP ZINC PLT STEEL 5/16IN
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Baron Cold Shut, Working Load Limit: 1900 lb, Trade Size: 3/8 in, Inside Length: 1-1/2 in, Inside Width: 5/8 in, Steel, Zinc, Silver Baron Chain Lap Link, Working Load Limit: 675 lb, Inside Length: 1-1/2 in, Inside Width: 5/16 in, Steel, Zinc
PIN HAIR 1/8 X 1-15/16IN National Hardware 3116BC Bit Snap SNAP TRIGGER 5/8IN
National Hardware 3116BC Bit Snap, Working Load Limit: 115 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 1-3/4 in L Baron Trigger Snap, Snap Opening Size: 3/8 in, Stainless Steel, Dimensions: 2-5/8 in L
SPRING SNAP RNDEYE SWVL 1/4 Campbell T7661361 Welded Ring National Hardware 3155BC Ring
Baron Spring Snap, Working Load Limit: 20 lb, Snap Opening Size: 3/16 in, Steel, Zinc, Dimensions: 1-7/8 in L Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2-1/2 in ID, Chain Size: #2, Steel, Zinc National Hardware 3155BC Welded Ring, Working Load Limit: 195 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Zinc
Campbell T4900624 Cold Shut Campbell T5950724 Repair Lap Link SNAP SPRING STNLS STL 3/16IN
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. Baron Spring Hook, Working Load Limit: 100 lb, Snap Opening Size: 1/4 in, Stainless Steel, Dimensions: 2 in L
SPRING SNAP ASST AL 5/16 SNAP LINK 9/32 Baron 5300-3/8 Round Eye Swivel Bolt Snap
Baron Spring Snap, Working Load Limit: 150 lb, Snap Opening Size: 1/2 in, Aluminum, Bright, Dimensions: 3-1/8 in L Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Baron Bolt Snap, Snap Opening Size: 1/4 in, Zinc, Nickel, Dimensions: 2-1/4 in L
Baron 5037-3/8 Square Loop Spring Snap National Hardware 3114BC Breeching Snap SPRING SNAP STRAP NCKL SWVL5/8
Baron Spring Snap, Working Load Limit: 30 lb, Snap Opening Size: 3/16 in, Steel, Nickel National Hardware 3114BC Breeching Snap, Working Load Limit: 85 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/4 in L Baron Spring Snap, Working Load Limit: 30 lb, Snap Opening Size: 3/16 in, Steel, Nickel, Dimensions: 2-1/2 in L
LINK CONNECTOR CHAIN NO35 National Hardware 3152BC Lap Link PIN LYNCH STANDRD 7/16X1-1/4IN
National Hardware 3152BC Lap Link, Working Load Limit: 725 lb, Trade Size: 5/16 in, Steel, Zinc Lynch pins from Koch Industries are yellow zinc plated. They feature a solid pin with an attached self-locking ring that snaps firmly down.
SHACKLE ANCHOR SCRW PIN 5/16IN Midland Big Orange 081253/MC647G Anchor Shackle SHACKLE ANCHOR GALV 3/16IN
WLL of 3/4 ton. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware Anchor Shackle, Working Load Limit: 650 lb, Trade Size: 3/16 in, Inside Width: 11/16 in, Wire Diameter: 7/32 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Steel, Steel, Galvanized, Suitable for: Rope or Chain, Includes: Removable Screw Pin
SPRING SNAP STRAP ZINC RIGID 1 SPRING SNAP STRAPEYE RIGID 3/8 Baron 125-5/8 Round Eye Swivel Rigid Bolt Snap
Baron Spring Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Zinc-Aluminum Alloy, Nickel Baron Spring Snap, Working Load Limit: 20 lb, Snap Opening Size: 3/16 in, Steel, Nickel, Dimensions: 1-7/8 in L Baron Bolt Snap, Snap Opening Size: 3/8 in, Zinc-Aluminum Alloy, Nickel
National Hardware 3000BC Round Swivel Eye Bolt Snap National Hardware 3155BC Ring LINK CONNECTOR CHAIN NO40
National Hardware 3000BC Bolt Snap, Working Load Limit: 15 lb, Snap Opening Size: 3/8 in, Zinc, Nickel Chrome, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3155BC Welded Ring, Working Load Limit: 300 lb, Ring Diameter: 2 in ID, Chain Size: #2, Steel, Zinc
LINK LAP ZINC PLTD STEEL 3/8IN Baron C-7350T-1/8 Quick Link QUICK LINK ZN 3/8
Baron Lap Link, Working Load Limit: 2400 lb, Inside Length: 1-5/8 in, Inside Width: 3/8 in, Steel, Zinc Baron Quick Link, Opening Size: 3/16 in, Working Load Limit: 220 lb, Steel, Zinc, Dimensions: 1-3/8 in L Factory number indicated thickness (inches).
SPRING SNAP STEEL ZN 11/32 SNAP LINK 5/16 SNAP SPRG INTRLK ZN 1/4X2IN
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Designed for lifting, pulling, mooring and other farm, marine and recreational applications. For quick attachment. Steel Body and spring.
PIN LINK TOP CAT 1 1-3/4X2-3/4 PIN LYNCH HVYD 7/16 X 1-1/2IN PIN LOCK PTO ROUND 1/4X1-3/4IN
Koch Top Link Pin, Hitch Category: Cat 1, Pin Hole Size: 3/4 in, Body Length: 4-1/2 in, Zinc-Plated, Yellow, Suitable for: Category 0 Through 3 Tractors Koch Round PTO Locking Pin, 1/4 in Pin Diameter, 1-3/4 in Overall Length, Zinc-Plated, Yellow
PIN HITCH BENT 1/2 X 3IN PIN HITCH SWIVEL 3/8 X 4-1/4IN Cambell T9600435 Anchor Shackle
Koch Bent Hitch Pin, Hitch Category: 2, 1/2 in Pin Diameter, 3 in Overall Length, Zinc-Plated, Yellow, Includes: Retaining Clip Koch Hitch Pin, Hitch Category: 2, 3/8 in Pin Diameter, 4-1/4 in Overall Length, Zinc-Plated, Yellow Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.
Fehr Bros 3/16 Anchor Shackle Baron 5013-3/8 Round Eye Swivel Trigger Snap BOLT SNAP NICKEL SWIVEL 3-3/16
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Baron Trigger Snap, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 2-1/2 in L Baron Bolt Snap, Working Load Limit: 80 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel, Dimensions: 3-1/8 in L
Baron 5013-3/4 Round Eye Swivel Trigger Snap Baron 25-1 Double Ended Bolt Snap with Strap Eye Baron 225-5/8 Round Eye Swivel Bolt Snap
Baron Trigger Snap, Working Load Limit: 50 lb, Snap Opening Size: 1/2 in, Zinc, Nickel, Dimensions: 2-3/4 in L Baron Bolt Snap with Strap Eye, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel, Dimensions: 3-1/4 in L Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Zinc-Aluminum Alloy, Nickel
Baron 225-3/4 Round Eye Swivel Bolt Snap SPRING SNAP RNDEYE SWVL 3/4 Baron 161Z Double Ended Bolt Snap
Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel Baron Spring Snap, Working Load Limit: 80 lb, Steel, Zinc, Dimensions: 4-1/2 in L, Suitable for: 5/8 in Rope Baron Chain Snap, Working Load Limit: 70 lb, Snap Opening Size: 1/4 in, Zinc, Nickel, Dimensions: 3-1/2 in L
Baron 5013-1/2 Round Eye Swivel Trigger Snap SNAP RIGID ROUND EYE 1/2IN WELDED RING ZINC 1-1/8
Baron Trigger Snap, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 2-1/2 in L Baron Bolt Snap, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel Campbell Welded Ring, Working Load Limit: 150 lb, Ring Diameter: 1-1/8 in ID, Chain Size: #7B, Solid Bronze, Polished
   
 
1 2 3 ... 8