Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > ANCHOR SHACKLES
Sort By:
1
Fehr Bros 1/4IN Anchor Shackle Baron 193LR-1/4" Screw Pin Anchor Shackle SHACKLE ANCHOR SCRW PIN 3/16IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Baron Anchor Shackle, Working Load Limit: 0.5 ton, Pin Type: Screw, Pin Diameter: 5/16 in, Steel, Galvanized Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized
Midland Big Orange 081163/MC645G Anchor Shackle SHACKLE ANCHOR SCRW PIN 5/16IN Midland Big Orange 081253/MC647G Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. WLL of 3/4 ton. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
SHACKLE ANCHOR GALV 3/16IN Cambell T9600435 Anchor Shackle Fehr Bros 3/16 Anchor Shackle
National Hardware Anchor Shackle, Working Load Limit: 650 lb, Trade Size: 3/16 in, Inside Width: 11/16 in, Wire Diameter: 7/32 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Steel, Steel, Galvanized, Suitable for: Rope or Chain, Includes: Removable Screw Pin Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Cambell T9600535 Anchor Shackle SHACKLE ANCHOR SCREW PIN 3/8IN Midland Big Orange 081293/MC648G Anchor Shackle
Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Baron Anchor Shackle, Working Load Limit: 1 ton, Trade Size: 3/8 in, Pin Type: Screw, Pin Diameter: 7/16 in, Steel, Hot-Dipped Galvanized Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
Cambell T9600635/T9640635 Anchor Shackle Fehr Bros 5/16 Anchor Shackle Midland Big Orange 081343/MC649G Anchor Shackle
Campbell Anchor Shackle, Working Load Limit: 1000 lb, Trade Size: 3/8 in, Pin Type: Screw, Carbon Steel, Zinc Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
National Hardware N223-669 Anchor Shackle Fehr Bros 3/8 Anchor Shackle SHACKLE ANCHOR SS 3/16IN
National Hardware 3250BC Anchor Shackle, Working Load Limit: 1000 lb, Pin Type: Screw, Galvanized Steel Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, 316 Grade, Trade Size: 3/16 in, Inside Length: 15/16 in, Inside Width: 5/8 in, Wire Diameter: 3/16 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain
SHACKLE SCRW PIN HT GALV 3/8IN SHACKLE ANCHOR SCRW PIN 7/16IN National Hardware N223-677 Anchor Shackle
Baron Anchor Shackle, Working Load Limit: 1-1/2 ton, Trade Size: 7/16 in, Pin Type: Screw, Pin Diameter: 1/2 in, Steel, Hot-Dipped Galvanized National Hardware 3250BC Anchor Shackle, Working Load Limit: 1500 lb, Galvanized Steel
Cambell T9600835/T9640835 Anchor Shackle SHACKLE ANCHOR SCREW PIN 1/2IN Midland Big Orange 081373/MC650G Anchor Shackle
Campbell Anchor Shackle, Working Load Limit: 2000 lb, Consumer Grade, Trade Size: 1/2 in, Pin Type: Screw, Pin Material: Carbon Steel, Carbon Steel, Zinc Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
Fehr Bros 1/2 Anchor Shackle National Hardware 3250BC Anchor Shackle SHACKLE ANCHOR SS 1/4IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware 3250BC Anchor Shackle, Working Load Limit: 2000 lb, Pin Type: Screw, Galvanized Steel National Hardware Anchor Shackle, Working Load Limit: 1100 lb, 316 Grade, Trade Size: 1/4 in, Inside Length: 1-1/32 in, Inside Width: 25/32 in, Wire Diameter: 1/4 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 5/16 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin
SHACKLE ANCHOR SS 5/16IN SHACKLE ANCHOR SCREW PIN 3/4IN SHACKLE D SS 1/4IN
National Hardware Anchor Shackle, Working Load Limit: 1650 lb, 316 Grade, Trade Size: 5/16 in, Inside Length: 1-3/16 in, Inside Width: 27/32 in, Wire Diameter: 9/32 in, Width Between Eyes: 9/16 in, Pin Type: Screw, Pin Diameter: 13/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain Baron Anchor Shackle, Working Load Limit: 4-3/4 ton, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Steel, Galvanized National Hardware D-Shackle, Working Load Limit: 1000 lb, Trade Size: 1/4 in, Inside Length: 7/8 in, Inside Width: 15/32 in, Pin Hole Diameter: 5/16 in, Width Between Eyes: 15/32 in, 316 Grade, Stainless Steel, Smooth, 19/32 in W, 1-9/16 in H
Fehr Bros 5/8 Anchor Shackle National Hardware 3250BC Anchor Shackle SHACKLE D SS 5/16IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware 3250BC Anchor Shackle, Working Load Limit: 4000 lb, Pin Type: Screw, Galvanized Steel National Hardware D-Shackle, Working Load Limit: 1700 lb, Trade Size: 5/16 in, Inside Length: 1-3/32 in, Inside Width: 9/16 in, Pin Hole Diameter: 13/32 in, Width Between Eyes: 9/16 in, 316 Grade, Stainless Steel, Smooth, 3/4 in W, 1-31/32 in H
SHACKLE ANCHOR SCREW PIN 5/8IN SHACKLE-FORGED GALV 5/8IN SHACKLE ANCHOR SS 3/8IN
Baron Anchor Shackle, Working Load Limit: 3-1/4 ton, Trade Size: 5/8 in, Pin Type: Screw, Pin Diameter: 3/4 in, Steel, Hot-Dipped Galvanized Designed for use in marine, industrial and construction applications. Galvanized finish for excellent corrosion resistance. Meet federal specifications RR-C-271D, Type IV, Class 2. Manufactured from forged steel. National Hardware Anchor Shackle, Working Load Limit: 2200 lb, 316 Grade, Trade Size: 3/8 in, Inside Length: 1-3/8 in, Inside Width: 1 in, Wire Diameter: 3/8 in, Width Between Eyes: 21/32 in, Pin Type: Screw, Pin Diameter: 15/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin
Midland Big Orange 081443/MC651G Anchor Shackle Fehr Bros 3/4 Anchor Shackle SHACKLE D SS 3/8IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Fehr Anchor Shackle, Working Load Limit: 3.25 ton, Commercial Grade, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Pin Material: 1045 Steel, Steel, Hot-Dipped Galvanized National Hardware D-Shackle, Working Load Limit: 2000 lb, Trade Size: 3/8 in, Inside Length: 1-9/32 in, Inside Width: 11/16 in, Pin Hole Diameter: 15/32 in, Width Between Eyes: 11/16 in, 316 Grade, Stainless Steel, Smooth, 15/16 in W, 2-11/32 in H
ANCHOR SHACKLE GALV 3/4 SHACKLE SCRW PIN HT GALV 3/4IN SHACKLE D SS 1/2IN
National Hardware Anchor Shackle, Working Load Limit: 10,000 lb, Trade Size: 3/4 in, Inside Width: 2 in, Width Between Eyes: 1-5/16 in, Pin Type: Removable Screw, Pin Diameter: 7/8 in, Pin Material: Steel, Steel, Galvanized National Hardware D-Shackle, Working Load Limit: 4000 lb, Trade Size: 1/2 in, Inside Length: 1-1/2 in, Inside Width: 25/32 in, Pin Hole Diameter: 5/8 in, Width Between Eyes: 25/32 in, 316 Grade, Stainless Steel, 1-3/16 in W, 2-29/32 in H, Includes: Removable Screw Pin
Midland Big Orange 081503/MC652G Anchor Shackle SHACKLE D SS 5/8IN Fehr Bros 7/8 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware D-Shackle, Working Load Limit: 5000 lb, Trade Size: 5/8 in, Inside Length: 1-31/32 in, Inside Width: 1-1/16 in, Pin Hole Diameter: 23/32 in, Width Between Eyes: 1-1/16 in, 316 Grade, Stainless Steel, 1-17/32 in W, 3-21/32 in H, Includes: Removable Screw Pin Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Midland Big Orange 081543/MC653G Anchor Shackle SHACKLE SCRW PIN HT GALV 7/8IN Fehr Bros 1 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
BOW SHACKLE HD GRAY 3/4X3/4IN Midland Big Orange 081593/MC654G Anchor Shackle Midland Big Orange 081613/MC655G Anchor Shackle
Heavy-duty bow shackle is recommended for all winches. The bow shackle consists of a threaded removable pin and an "O" shaped loop at the top to take loads from many different directions. The isolator prevents distracting rattling sounds and marring to bumper. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
   
 
1