|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cable protector plates for wood studs. Standard type/non-gangable. Protects non-metallic sheathed cable or raceway type wires running through wood studs from accidental nail, screw or drill penetration. Also applies to plumbing to protect nonmetallic piping. No nails required. Pre-galvanized steel construction for added corrosion protection. No additional hardware required, just position and hammer down spurs. UL, cULus Listed.
|
Attach large diameter cable to wood surfaces with the Gardner Bender 1-3/8 in x 13/16 in steel service entrance cable staples for #6/3 SEU cable 10 pack. These staples feature offset legs to prevent wood splitting and a diamond head for easy hammering.
|
Calterm offers a broad selection of professional-grade adhesive tape, including different grades of electric tapes, sealant tapes for a complete assortment and various colors to support your application. Adhesive tape acts as a superior solution for sealing and insulating splices, terminals and electrical connections in indoor and outdoor applications. The assortments of electrical tape designed for general-purpose electrical applications and made from low-lead PVC material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and Do-It-Yourselfers myriad packaging options, ergonomic designs and wire ranges.
|
General-purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL listed and CSA certified.
|
Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. They are designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
|
GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
|
These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install - you can't over-torque this connector because it's patented hex-head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.
|
GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live-action as GB WingGard connectors with knurled wings for a sure grip and greater twisting leverage/torque. In addition GreenGard connectors offer added plating protection for corrosion resistance in grounding applications. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.
|
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4 in (6 mm) Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia.
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/2 in (13 mm) Dia.
|
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
|
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
|
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil. thick. UL listed and CSA Certified.
|
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
|
The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Insulated Clamp, 3/8 in Diameter Maximum Bundle, Rubber/Steel, Black
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/4 in (19 mm) Dia.
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1 in (2.54 cm) Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell.
|
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
|
The Gardner Bender 26-piece heat shrink tubing assortment is ideal for insulating electrical wire, repairing appliance cords and covering tool handles. This tubing comes in 4 in lengths and offers resistance to moisture, solvent and flame damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can be driven in with a hammer.
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/4 in (19 mm) Dia.
|
This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.
|
This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.
|
Scotch? commercial-grade vinyl electrical tape 700 is a high-quality, vinyl insulating tape. it has excellent resistance to abrasion, moisture, alkalies, acids, copper corrosion and varying weather conditions. Scotch? tape 700 provides excellent mechanical protection with minimum bulk.
|
For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords covering tool and sporting equipment handles and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents.
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
Secures cable, tubing and wires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4 in (6 mm) Dia.
|
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/2 in (13 mm) Dia.
|
This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For insulating, repairing and protecting electrical wire. UL Listed.
|
Black friction tape with a matted finish that provides the best gripping surface available. Use over electrical splices, wrapping grips or sporting goods.
|
For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
|
Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating.
|
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vinyl insulated copper. Rated at 600 V maximum. Temperature rating of 167 deg F. UL Listed.
|
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
|
These terminals are constructed with heat shrink insulation adhesive lines to waterproof and environmentally seal electrical connections when crimped and heated.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick and reliable crimp-type wire connections. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating.
|
Nylon fully insulated, rated at 600 V. 0.250 in x 0.032 in tab. 105 deg C temperature rating. Card contains male and female disconnects.
|
Quick and reliable crimp-type wire connections. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated at 600 V maximum, 167 deg F. UL Listed.
|
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
|
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
|
|
|
Estimates
