|
|
|
|
|
|
|
|
|
|
|
|
|
|
Attach large diameter cable to wood surfaces with the Gardner Bender 1-3/8 in x 13/16 in steel service entrance cable staples for #6/3 SEU cable 10 pack. These staples feature offset legs to prevent wood splitting and a diamond head for easy hammering.
|
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.
|
The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can be driven in with a hammer.
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1/4 in black polyethylene clip-on coaxial masonry staples 25-pack feature UV-resistant polyethylene saddles that are suitable for indoor and outdoor applications. These staples are ideal for securing RG-59 and RG-6 coaxial cables into cement block and masonry and include hardened nails that can penetrate cement block, mortar or plaster surfaces.
|
The Gardner Bender 2-7/16 in x 1-1/16 in steel staples for 4/3 and 2/3 service entrance cable 10 pack install cable easily onto wood surfaces. These staples offer sharp offset legs that resist splitting wood and feature a burr-free construction.
|
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
The 1/4 in black polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are ideal for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer for quick and easy installation. 1 nail per staple for quick and easy installation.
|
The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 3/16 in black polyethylene low-volt staples 25-pack feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration for indoor and outdoor use and are suitable for securing speaker, telephone, bell and other low-volt wires.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. The Gardner Bender 1/4 in white polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are an excellent choice for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These low-voltage coaxial cable staples feature UV-resistant polyethylene saddles able to withstand both indoor and outdoor applications. Zinc-plated nails resist rust and corrosion and feature a sharp tip for easy starting and to reduce cracking and splintering of wood during installation. One nail per staple facilitates a quick hammer installation. Designed to secure cable of 1/4 in Dia or less including CAT6 or RG type cables CAT 6, RG-6/U, RG-62A, RG-62/U to wood.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Insulated staples protect and secure NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. 40 per card.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
The Gardner Bender gray plastic service entrance cable straps for #2 SER cable 4 pack accommodate larger sized electrical cable. These straps offer zinc-plated nails for rust- and corrosion protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
|
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. These Gardner Bender staples feature durable metal construction. The staples exhibits a silver metallic finish and are 5/32 in W. These staples are meant for use with the Gardner Bender low voltage staple gun model #MSG-301 (not included). Staples cover a wide range of wire applications. Easy to load, easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Staples feature durable metal construction with a silver metallic finish and are 1/4 in (6 mm) W. Designed for use with the Gardner Bender low voltage staple gun model #MSG-301 (not included) these staples cover a wide range of applications including securing television, CAT 5E, CAT 6 and RG-59 and computer cables. Quick to load, easy to install, these staples get the job done! Staple is also available in 5/32 in (4 mm) size under Model# MMS-3112 which covers telephone, alarm, security, doorbell, thermostat and speaker cable/wire.
|
Plastic insulated straps secure service entrance cable. Electro-zinc-plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
|
Secure low-voltage wire into wood with the Gardner Bender 3/16 in white polyethylene wire staples 100 pack. These stapes easily install with the use of a hammer and offer corrosion and UV resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender 1/2 in blue plastic metal insulated staples for 14/2 and 12/2 cable 100 pack fasten electrical cable to wood surfaces. These staples offer a plastic sheath to prevent arc faults if the staple is over-driven through a cable jacket.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These Gardner Bender #6 service entrance cable straps 5 pack secure cable and are designed for recessed nail heads when the strap is fully driven into wood.
|
Made of 12 ga carbon steel, insulated with high-impact, hot-melt PVC bonded to the top of the staple, tumble deburred and with rust inhibitor applied. Reduces risk of electrical fire and prevents a short circuit if the insulation is cut. Color coded for size and application and highly visible. Used with BX or 3 conductor, #14, #12 and #10 WG or 2 stacked oval #14 and #12 WG. Rated for up to 2500 V. Dielectric rating per ETL Test 525777.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender 3/16 in x 1-3/8 in gray steel staples for service entrance cables 100 pack fasten a variety of cable sizes. These straight-driving staples won't split or splinter wood.
|
The Gardner Bender gray plastic service entrance cable straps for #2 SER cable 5 pack accommodate larger sized electrical cable. These straps offer zinc-plated nails for rust- and corrosion protection.
|
The Gardner Bender 1/4 in coaxial cable clamp secures RG-59, RG-6 coaxial cables and others. This cable clamp includes a combo screw for safer installations and features a screw-in depth of 1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Zenith nail in coax clips, white come in a 20-Piece set which allows you to attach coaxial cable to your wall or any other sturdy platform.
|
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL listed.
|
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner Bender 1-1/16 in x 1-7/16 in gray steel staples for service entrance cables 100 pack drive straight and won't split wood. These staples are ideal for 4/3 and 2/3 SE cables.
|
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
|
The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Organizes and secures multiple cable runs on a stud. Secures NM, coaxial and CAT 5 all on the same staple. Snap lock gate quickly and easily secures all cables. Self-centering tab guides ideal placement on the stud. Secures with a nail or staple for wood studs. Cable combinations eight NM-B Flat 14-2.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun.
|
3M? cable stackers organize cable runs and aid in identification, putting an end to tangled wires and the potential heating that could occur when cables are held together tightly under a single fastener. Easy installation simplifies compliance with the spacing requirements of the National Electrical Code, article 300-4-(d) and the Canadian Electric Code Part I, Section 12-516. Made from reclaimed plastic.
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun.
|
Used to secure low voltage wiring or coaxial cable.
|
Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
These coaxial nail fasteners allow you to easily route and install cables without damaging the cable jacket, creating a cleaner look and help prevent tripping over loose cables. The pre-installed nails make securing a 75 ohm cable to a nailable surface easy while also making sure not to pinch or crush the cable shielding. They're perfect for retrofitting cables to rooms where in-wall installations aren't optional.
|
AmerTac Cable Staple Nail, Flat Cable, Plastic, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Service entrance cable strap or staple designed for securing larger sized electrical cable onto wood surfaces. Stabilized polyethylene saddle withstands both extreme cold and UV rays without cracking or deteriorating. Designed to cradle and protect delicate cable insulation during installation. Zinc-plated nails resist rust and corrosion and recess fully into the strap to eliminate snags. Secures NO 6 SER service entrance cable. Assembled in USA with components from USA and China.
|
The Gardner Bender low voltage staple gun offers heavy-duty stainless steel construction and secures wires up to 1/4 in Dia. Gun features a safety handle to ensure staples don't release unintentionally. This stapler gun is designed for use with alarm, speaker, thermostat, A/V and computer network wires. Two sizes of staples available, 5/32 in (4 mm) model #MMS-3101 and 1/4 in (6 mm) #MMS-3102.
|
Can shoot 3 size coverings, NM, Coax, voice/data and low volt staples from the same gun without any adjustments. Cable guide for continuous stapling. Ergonomic design, high impact plastic construction. Can use MPS-2080, 5/16 in blue staples, SKU 655.8894, MPS-2100 3/8 in white staples, SKU 055.9039 and PS-2125V 1/2 in black staples, SKU 574.6821.
|
|
|
Estimates